|
|
تفاصيل المنتج:
|
| مادة: | 100 ٪ HDPE البلاستيك | سماكة: | 1.2-1.5mm |
|---|---|---|---|
| سطح: | سطح ناعم أو محكم | قوة الشد: | 25kn/م |
| معيار: | أستم؛ غيغابايت قياسي؛ | قوة قشر: | 14.2 كيلو نيوتن/م |
| ارتفاع: | 100 مم | لون: | أسود ؛ أصفر ؛ أخضر |
| مسافة اللحام: | 330mm | كثافة: | 0.950 جم/سم 3 |
| شهادة: | CE ؛ ISO ؛ ASTM | ||
| إبراز: | 100mm HDPE Geocell for driveways,HDPE Geocell road base reinforcement,geocell for access road Thailand,HDPE Geocell road base reinforcement,geocell for access road Thailand |
||
100mm HDPE Geocell for Driveway and Access Road Base Reinforcement
GeoMax® Geocell — Advanced Ground Stabilization Solution
GeoMax® Geocell is a modern geotechnical reinforcement technology developed to improve ground stability, increase bearing capacity, and control surface erosion. Manufactured from high-density polyethylene (HDPE) and formed into a robust three-dimensional cell structure, it distributes loads uniformly and accommodates a wide range of infill materials such as soil, sand, gravel, and reused aggregates.
Engineered for long-term performance, the system offers excellent resistance to UV exposure, chemical aging, and harsh environmental conditions. As a flexible and eco-friendly reinforcement method for civil and environmental construction, GeoMax® Geocell is suitable for use in highways, rail infrastructure, slope protection, landfill engineering, and subgrade improvement. It delivers engineers and project owners a dependable, cost-effective, and sustainable solution for soil reinforcement and ground enhancement.
SPECIFICATIONS
| Index Properties | Test Method | Units | Values | |||||||
| Material | - | - | 100% Virgin HDPE | |||||||
| Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
| Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
| Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
| Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
| Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
| Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
| OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
| Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
| Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
| Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
| Dimensions | ||||||||||
| Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
| Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
| Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
| Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 | ||
|
SOIL REINFORCEMENTGeomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. |
|
SLOPE PROTECTIONGeomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. |
|
CHANNEL PROTECTIONGeomax®(Hdpe Geocell) delivers stability and protection of channels |
|
RETAINING WALLSGeomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. |
What is the typical stress-strain behavior of your geocell systems?
Our geocells exhibit an initial elastic response followed by plastic deformation, with typical failure strains between 15-25%. The composite system shows significant strain hardening due to the confinement effect, providing ductile failure modes rather than brittle fracture.
How do you determine the required factor of safety for different applications?
Safety factors vary by application:
2.5-3.0 for permanent structures
2.0-2.5 for temporary works
3.0-4.0 for critical infrastructure
Additional factors for uncertain soil conditions or seismic zones
What is your approach to durability design for aggressive environments?
We employ:
Material selection based on chemical resistance testing
Increased wall thickness for critical applications
Special additives for UV and oxidation resistance
Protective measures during construction
اتصل شخص: Xu
الهاتف :: +86 13966660061
