|
|
제품 상세 정보:
|
| 재료: | 100% HDPE 플라스틱 | 두께: | 1.2-1.5mm |
|---|---|---|---|
| 표면: | 부드럽거나 질감이있는 표면 | 인장강도: | 25kn/m |
| 기준: | ASTM; GB 표준; | 껍질 힘: | 14.2 kn/m |
| 키: | 100mm | 색상: | 검은 색; 노란색; 녹색 |
| 용접 거리: | 330mm | 밀도: | 0.950 g/cm3 |
| 자격증: | ce; iso; astm | ||
| 강조하다: | HDPE geocell for pedestrian paths,100mm welding geocell for trails,HDPE geocell for bike lanes |
||
GM330-100mm HDPE Welding Geocell for Pedestrian Paths, Trails & Bike Lanes
GeoMax® Geocell provides powerful soil confinement and load-bearing enhancement for challenging construction sites. Manufactured from tough high-density polyethylene (HDPE), its engineered 3D cellular design locks in fill materials, minimizes soil movement, and significantly boosts ground stability while reducing erosion.
Built for long-term performance, GeoMax® Geocell resists UV aging, chemical exposure, and severe environmental conditions, making it ideal for durable and low-maintenance infrastructure. As an eco-friendly and cost-saving reinforcement solution, it is widely used in highways, rail embankments, slope protection, retaining structures, landfills, and soft-soil improvement — enabling stronger, more sustainable, and future-ready construction.
SPECIFICATIONS
| Index Properties | Test Method | Units | Values | |||||||
| Material | - | - | 100% Virgin HDPE | |||||||
| Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
| Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
| Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
| Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
| Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
| Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
| OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
| Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
| Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
| Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
| Dimensions | ||||||||||
| Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
| Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
| Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
| Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 | ||
|
SOIL REINFORCEMENTGeomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. |
|
SLOPE PROTECTIONGeomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. |
|
CHANNEL PROTECTIONGeomax®(Hdpe Geocell) delivers stability and protection of channels |
|
RETAINING WALLSGeomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. |
How do you verify long-term performance predictions?
We use:
Accelerated laboratory testing
Field performance monitoring
Case history analysis
Mathematical modeling
Periodic sampling from test sections
Design Applications
35. What are the design considerations for channel lining applications?
Channel design considers:
Hydraulic shear stresses
Flow velocity and turbulence
Bank stability requirements
Erosion potential
Vegetation establishment needs
36. How do you design for dynamic loading conditions?
Dynamic design includes:
Cyclic load testing
Fatigue resistance evaluation
Resonance frequency analysis
Damping characteristics
Permanent deformation prediction
담당자: Xu
전화 번호: +86 13966660061
