Product Details:
|
Raw Material: | HDPE Plastic | GeoMax Standard: | ASTM |
---|---|---|---|
Cell Height: | 50mm-300mm | Geomax Model: | GM445 |
Color: | Black, Green, Brown, Black Yellow White Green, Green Or As Per Request | Welding Space: | 445mm |
Cell Thickness: | 1.5mm | Geocell Surface: | Textured&Perforated |
Highlight: | Cellular Confinement System Geocell,Retainingwalls Geocell,Hdpe Geocell |
Hdpe Geocell For Stabilization Slope Protection And Retainingwalls Cellular Confinement System
Product Introduction
Hdpe Gecell is a three-dimensional reinforced flexible material that enhances the bearing capacity of composite structures and reduces deformation through friction, lateral constraint, and mesh effect. It is widely used in soft foundation reinforcement, slope stability, and reinforced retaining wall engineering When the geocell is in long-term service, internal water seepage will gradually loosen the strip of the geocell, causing significant deformation of the entire geocell and weakening its ability to suppress soil displacement, thereby affecting the quality of reinforcement. Therefore, in some engineering applications, the geocell will be perforated to achieve lateral drainage However, there is relatively little research on the reinforcement effect of perforated geogrids both domestically and internationally, and the current situation where engineering practice takes priority over relevant theoretical research affects its promotion and application in the construction field
Specifications
Index Properties | Test Method | Units | Values | |||||||
Material | - | - | 100% Virgin HDPE | |||||||
Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
Dimensions | ||||||||||
Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 |
![]() |
|
![]() |
|
![]() |
|
![]() |
|
Contact Person: Xu
Tel: +86 13966660061