Product Details:
|
Material: | HDPE Plastic | GeoMax Standard: | ASTM |
---|---|---|---|
Cell Height: | 150mm | Geomax Model: | GM150-445 |
Color: | Black; Green; Yellow | Welding Space: | 445mm |
Cell Thickness: | 1.5mm | Geocell Surface: | Textured&Perforated |
Cell Embedment: | 3 Cells | Panel Expansion: | 4.48m*0.87m |
Highlight: | 150mm Height HDPE Geocell,445mm Welding Space HDPE Geocell,Black HDPE Geocell |
Black HDPE Geocell 150mm Height 445mm Welding Space For Retaining Walls River Walls Gabion Replacement Vegetated Wall
GeoMax® Geocell Product Introduction
GeoMax® Geocell Retaining Walls not only enhance the natural beauty with their vegetated outer layer but also offer flexibility, making them ideal for challenging project conditions such as soft subgrades, limited access, and space constraints. Geocell Systems are known for their durability, water resistance, and flexibility, providing a cost-effective and eco-friendly alternative to conventional earth retention methods. These systems allow for rainwater to seep through the wall fascia, reducing runoff. GeoMax® Geocells can be layered to form a gravity-based retaining wall, which relies on its mass for stability. This type of wall is straightforward to build using local materials. Moreover, gravity retaining walls offer a flexible construction advantage, permitting them to adapt to diverse underlying soil conditions while maintaining their structural integrity.
SPECIFICATIONS
Index Properties | Test Method | Units | Values | |||||||
Material | - | - | 100% Virgin HDPE | |||||||
Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
Dimensions | ||||||||||
Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 |
APPLICATION
![]() |
|
![]() |
|
![]() |
|
![]() |
|
Contact Person: Xu
Tel: +86 13966660061