|
Product Details:
|
| Min. Order Quantity: | 1,000 M² | Sheet Thickness: | 1.5 Mm |
|---|---|---|---|
| Raw Material: | HDPE | Weld Distance: | 356 Mm |
| Surface: | Textured, Perforated | Sample Policy: | Free, Courier Paid By Buyer |
| Cell Depth: | 100 Mm | UV Additive: | ≥2.0% |
| Strip Color: | Green / Black | Typical Use: | Slopes, Roads, Channels And Walls |
| Highlight: | HDPE geocell panel 100mm,geocell for park slopes,HDPE geocell for green belts |
||
In parks and green belts, black cell walls can stand out before the grass grows in. This 100 mm GM356 geocell panel is made in green on request.
This geocell panel is made from 1.5 mm HDPE strips welded every 356 mm. Expanded, one GM356-100 geocell section measures 2.35 x 7.65 m and covers 18.0 m², with 100 mm deep cells of about 260 x 225 mm.
| Property | GM356 HDPE Geocell |
| Model | GM356-100 |
| Expanded Section | 2.35 x 7.65 m (9 x 34 cells) |
| Open Cell Size | 260 x 225 mm |
| Raw Material | HDPE, carbon black ≥ 2.0% (ASTM D 1603) |
| Strip Tensile Strength | ≥ 22 kN/m (ASTM D 638) |
| Color | Green on request; black standard |
| Surface | Textured, perforated (10 mm holes, < 12% of wall area) |
| Density | 0.935–0.965 g/cm³ (ASTM D 1505) |
| Cell Depth | 100 mm |
| Strip Thickness | 1.5 mm ±5% (ASTM D 5199) |
| Weld Distance | 356 mm |
| Seam Peel Strength | ≥ 14.2 kN/m (USACE GL-86-19) |
| Coverage per Section | 18.0 m² |
![]()
Close-up of GeoMax HDPE geocell: textured, perforated cell walls
Green strips are made to order; black is standard. The geocell walls confine the infill so it does not spread sideways under load. Black geocell is standard; green, yellow and tan geocell strips are made to order. A confined geocell layer spreads loads over a wider area than loose fill alone. Neighbouring geocell sections are joined along their edges to cover any area.
GM356 has a 356 mm weld distance, one of our smaller cell sizes. Small cells hold infill well on steeper slopes and under wheel loads. The same model is made in other depths from 50 to 300 mm.
![]()
HDPE geocell on a project site
Each folded section is film-wrapped; pallets or loose loading as requested. Minimum order 1,000 m², with smaller trial orders open for discussion. Delivery takes 10–20 days and daily capacity is 3,000 m². Free sample, courier paid by the buyer.
Behind the GeoMax brand is Anhui Huifeng New Synthetic Materials Co., Ltd., a manufacturer with its own factory since 2006 and exports to more than 40 countries.
Q: Which cell depth is right for a driveway or yard?
A: Shallow depths (50–75 mm) suit paths and light parking; 100–150 mm is common for driveways and access roads. Final design should be checked by your engineer.
Q: Can I get a sample?
A: Yes, a free sample is available; the buyer pays the courier.
Q: How are geocell sections joined on site?
A: With staples, cable ties or dedicated connectors along the edges of neighbouring sections.
Q: What do you need for a quotation?
A: Cell depth, weld distance, colour, quantity in m² and destination port.
For a quotation, share your project drawing or the cell depth, weld distance and area; we will suggest a suitable size.
Contact Person: Ms. Xu
Tel: +86 13966660061