|
|
รายละเอียดสินค้า:
|
| วัสดุ Geocell: | พลาสติก HDPE 100% | ความหนา: | 1.2-1.7มม |
|---|---|---|---|
| พื้นผิว: | พื้นผิวเรียบหรือพื้นผิว | ความต้านแรงดึง: | 25kN/m |
| มาตรฐาน: | มาตรฐาน ASTM; มาตรฐาน GB; | ความแข็งแรงของเปลือก: | 14.2 kN/m |
| สี: | สีดำ; เหลือง; สีเขียว | ระยะการเชื่อม: | 356 มม. |
| ความหนาแน่น: | 0.950 g/cm3 | ใบรับรอง: | CE; iso; ASTM |
| เน้น: | HDPE geocell for soil retention,geocell system for vegetation growth,HDPE geocell for 2:1 slopes |
||
GM356 HDPE Geocell System for 2:1 Slopes Vegetation Growth and Soil Retention
GeoMax® HDPE Geocell is a cellular confinement system engineered to stabilize steep slopes by limiting soil movement and improving surface integrity. When expanded and filled, the interconnected cell structure forms a stable matrix that supports vegetation while reducing erosion and shallow slope failure.
The system is widely applied on 2:1 slopes where both structural stability and environmental integration are required.
SPECIFICATIONS
| Index Properties | Test Method | Units | Values | |||||||
| Material | - | - | 100% Virgin HDPE | |||||||
| Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
| Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
| Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
| Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
| Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
| Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
| OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
| Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
| Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
| Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
| Dimensions | ||||||||||
| Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
| Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
| Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
| Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 | ||
|
SOIL REINFORCEMENTGeomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. |
|
SLOPE PROTECTIONGeomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. |
|
CHANNEL PROTECTIONGeomax®(Hdpe Geocell) delivers stability and protection of channels |
|
RETAINING WALLSGeomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. |
Q1: Is this geocell suitable for 2:1 slope gradients?
Yes. The GM356 configuration with deeper cells provides sufficient confinement to resist soil sliding on 2:1 slopes when properly anchored.
Q2: Can vegetation grow within the geocell system?
Yes. The open cellular structure allows topsoil placement and root penetration, supporting natural vegetation growth.
Q3: Does the system help reduce surface erosion from rainfall?
The confined soil and improved drainage significantly reduce erosion caused by rainfall and surface runoff.
Q4: Is additional slope protection required above the geocell?
In most cases, no. However, site-specific conditions may require geotextiles or surface protection at the crest.
Q5: Is this solution suitable for permanent slope works?
Yes. When installed correctly, the system provides long-term slope stabilization.
ผู้ติดต่อ: Xu
โทร: +86 13966660061
Thai
