|
|
Thông tin chi tiết sản phẩm:
|
| Material: | High Density Polyethylene | Thickness About Geocell: | 1.2mm-1.5mm |
|---|---|---|---|
| Geocell Standard: | ASTM or GB Standard | Height: | 100mm |
| Geocell Surface: | Textured& Perforated | Welded Distance: | 445mm |
| Density: | 0.950 g/cm3 | Carbon Black: | 1.5% |
| HDPE Geocell Peeling Strength: | 10-14.2kN/m | HDPE Geocell Tensile Strength: | 25kN/m |
| HDPE Geocell Our Minimum Quantity: | 3600m2 | Colors: | Black, Green |
Perforated Drainage Geocell Welded HDPE 100mm Height for Landscaping & Erosion Control Green
PRODUCT INTRODUCTION
GeoMax® Geocells are high-performance, three-dimensional honeycomb structures made of reinforced high-density polyethylene (HDPE) sheets ultrasonically welded to form a strong mesh.
These cells are incredibly versatile and cost-effective, making them a fantastic solution for a wide range of geotechnical applications. You can fill them with sand, soil, or local materials, depending on your needs.
This innovative system is an incredible value! It's the perfect solution for a variety of infrastructure applications, including driveways, highways, railroads, landscaping, landfills, parking lots, and pipelines. The system offers incredible time and labor savings by reducing overall project costs, minimizing environmental impact, and simplifying installation.
| Index Properties | Test Method | Units | Values | |||||||
| Material | - | - | 100% Virgin HDPE | |||||||
| Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
| Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
| Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
| Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
| Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
| Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
| OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
| Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
| Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
| Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
| Dimensions | ||||||||||
| Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
| Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
| Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
| Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 | ||
 |
SOIL REINFORCEMENTGeomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. |
|
SLOPE PROTECTIONGeomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. |
|
CHANNEL PROTECTIONGeomax®(Hdpe Geocell) delivers stability and protection of channels |
|
RETAINING WALLSGeomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. |
FAQ:
Q: How to prevent infill loss?
A:Top Layer Geotextile: Prevents washout.
Use Cohesive Soil-Crushed Stone Mix.
Q: Where can Geocells be used?
A:Roads/Railways: Load distribution over weak subgrades.
Slopes: Erosion control and vegetation support.
Temporary Access Roads: Rapid deployment on soft ground.
Retaining Walls: Cost-effective alternative to gabions.
Q: Are Geocells eco-friendly?
A:Recyclable: HDPE can be repurposed.
Vegetation-Compatible: Some designs allow root penetration.
Người liên hệ: Xu
Tel: +86 13966660061
